Fill in your phone number below and
we will contact you as soon as we can.
SBCT (Spring Band Clamp Tool) is used to loosen a special type of hose clamps, so-called resilient hose clamps. What makes Binar’s solution unique is that the tool is designed based on the concept of Poka-yoke (ポ カ ヨ ケ), which is a Japanese method of avoiding mistakes before they occur. This tool tells you when to fix a resilient hose clamp and ensures that you have fixed it. Smart huh?
Resilient hose clamps used cooling, heating, servo, fuel, air in, for example, the car industry are constructed as open and pre-positioned on hoses. These hose clamps from MUBEA must be snapped to close. If the fitter misses this step, it can cause major problems and require expensive solutions later on.
The tool ensures that the fitter has fixed POPP (Pre-Opened Pre-Positioned) Clamps, Spring Band Clamps, Constant Tension Band Hose Clamps.
Access even in the tightest of spots. Slim ergonomic design and long-range wireless communication.
Frequency
2,4 GHz
Output
+5 dBm
Type
IEEE 802.15.4
Communication
6LoWPAN (IPv6)
Encryption
AES-128
Range (air)
approx. 50 m
Contact
1 x RJ45
IP address (Default)
192.168.1.88
Gateway (Default)
0.0.0.0
Subnet mask (Default)
255.255.255.0
Contact
2 x M12, 4-poles, socket, D-coded
Data transmission
10/100 Mbit/s
Contact
1 x M12, 5-poles, pin, A-coded
1 x M12, 5-poles, socket, A-coded
Data transmission
125 kbit/s
Battery type
Lithium ion
Input voltage
230 V
Contact
Euro Plug
Input voltage
20 – 32 VDC
Contact
1x M12, 4-poles, pin, T-coded
CE
EN 61000-6-2 and EN 61000-6-4
Profinet
YES
Dimensions
Tool: B 50 x H 335 x D 50 mm
Charger: B 100 x H 265 x D 110 mm
Receiver: B 150 x H 145 x D 55 mm
Weight
Tool: 350 g
Charger: 250 g
Receiver: 650 g
Mounting
Charger: Wall mounted, 2 x M6
Receiver: Wall mounted, 2 x M6
IP Code
IP41
Temperature interval
0 – 50 °C
Humidity
0 – 95% non-condensing
Wattage
10 W
Power consumption
TBD
